|
|
| Ordinary stainless steel needle electrodes quickly become blunt through the microscopic melting of the tip. To prevent this phenomena, the new range of Cotswold MicroDissection Needles are produced in high temperature tungsten which melts at 3400oC. This ensures that the ultra-sharp tip remains intact for a significantly longer period than the similar stainless steel product. | |
| PMS1651R | Re-usable Cotswold Needle, 3cm shaft length, straight, pack of 3 |
| OLD CODE PMS1690 |
 |
| with 2.38mm diameter connector | |
| PMS1653R | Re-usable Cotswold Needle, 3cm shaft length, 1cm angled 45o ,pack of 3 |
| OLD CODE PMS1691 |
 |
| with 2.38mm diameter connector | |
| PMS1654R | Re-usable Cotswold Needle, 5.5cm shaft length, straight, pack of 3 |
| OLD CODE PMS1600 |
 |
| with 2.38mm diameter connector | |
| PMS1655R | Re-usable Cotswold Needle, 5.5cm shaft length, 1cm angled 45o, pack of 3 |
| OLD CODE PMS1601 |
 |
| with 2.38mm diameter connector | |
| PMS1602R | Re-usable Cotswold Needle, 6.5cm shaft length, straight, pack of 3 |
| OLD CODE PMS1602 |
 |
| with 2.38mm diameter connector | |
| PMS1603R | Re-usable Cotswold Needle, 6.5cm shaft length, 1cm angled 45o, pack of 3 |
| OLD CODE PMS1603 |
|
| with 2.38mm diameter connector | |
| PMS1656R | Re-usable Cotswold Needle, 7.5cm shaft length, straight, pack of 3 |
| OLD CODE PMS1604 |
|
| with 2.38mm diameter connector | |
| PMS1605R | Re-usable Cotswold Needle, 7.5cm shaft length, 1cm angled 45o, pack of 3 |
| OLD CODE PMS1605 |
|
| with 2.38mm diameter connector | |
| PMS1606R | Re-usable Cotswold Needle, 7.5cm shaft length, 1cm angled 90o, pack of 3 |
| OLD CODE PMS1606 |
|
| with 2.38mm diameter connector | |